To setup your Remote Access on Mac OS X, please follow the directions below:

1. Start from your desktop and click on the Apple in the upper-left corner. Go down and click on System Preferences.

2. Once the System Preferences window loads, click on "Network" to load the Network Preferences.

3. In the Network Preferences pane:

• Set location to "Automatic"
• Set Show to "Internal Modem"
• Set Configure to "use PPP"
• Enter the "Domain Name Servers" as:
  • 64.242.76.11
  • 192.41.1.144
• Leave the "Search Domain" area blank.

4. In the PPP tab, Service Provider should be "hisnet.org" Use the number finder to find a telephone number. Note: you are responsible for selecting a phone number which is local to your area. hisnet.org cannot be held responsible for any toll charges related to the number selected.

• The "Account Name" is your user ID for logging into the network. Note that this will include a prefix (such as "srv2." and a suffix such as @surf.net, @world.net, @pop.net, @dial.net, or @usa.
  
      srv2.username@surf.net
  
  If You don't know your prefix or suffix, please call technical support at 972-907-9399 for assistance.
  
  
• The Password is the password you selected for your hisnet.org account.
  
  

5. Click the PPP options button. Check the following boxes:

• Connect automatically when starting TCP/IP applications
• Prompt every 15 minutes to maintain connection
• Disconnect if idle for 15 minutes
• Disconnect when user logs out
• Use TCP header compression

6. Click the Proxies tab.

• Check the Web Proxy (HTTP) box
• Check the Secure Web Proxy box
• Enter 99.68.200.68 in the address spaces next to the checked boxes
• Enter in the port spaces to the right of the checked boxes

7. Click the Modem tab.

• Select the modem you wish to use
• Check the Enable error correction box
• Check the Sound On radio button
• Check the Tone Dialing radio button
• Check the Wait for dial tone box